|
Siebring Manufacturing, Inc. |
|
150 Heatwave
Multi-Fuel Furnace
The 150,000 btu. Heat Wave Multi-Fuel furnace
offers simplicity and accessibility for easy care. The unit comes
fully assembled and ready to set into place. The electrical, fuel source and chimney are the customers responsibility. The hourly usage is 1.10
gal. per hr. The blower pushes air approx. 40 50 feet and gives a temp rise
of 70 degrees. The unit should heat a 1500 to 2000 sq. ft. area at 10 degrees
and hold 65 degrees inside.
See product specifications in the table at the
bottom of this page.
|
Product Number |
Price |
|
825-0815 |
$5,495.00 |
|
TRUCK - FOB
Iowa |
|
 |
250 Heatwave Multi-Fuel Furnace
The 250 Heatwave
uses 1.75 gal. oil per hour. The used oil is stored in the 270 gal.
fuel tank. The tank allows the furnace to be out of the way of fumes and
also gives a work area for draining filters. The oil fill door is large to
accommodate a pail of oil being emptied. The furnace auxiliary pump is
mounted on the uprights of the tank-furnace legs. The filter above the tank
is a pot type filter with cloth strainers. The tank is equipped with a drain
plug on each end and a hand pump to empty water from beneath the oil without
emptying the oil storage. The tank is baffled and has two toe steps for easy
service. The tank is usable with both the 150 and 250 Heat wave. All
furnaces require a 20 psi compressed air source for atomizing the used oil.
See product specifications in the table at the
bottom of this page.
|
Product Number |
Price |
|
825-0825 |
$6,765.00 |
|
TRUCK - FOB
Iowa |
|
 |
|
350 Heatwave
Multi-Fuel
Furnace
The 350
Heatwave furnace is
unique in its ability to be accessed easily for cleaning. The blower,
mounted on top and equipped with an energy efficient motor, offers a 40%
energy savings. Makes a small "Foot print" on the shop floor!
Heat can be piped or used most preferably as a
horizontal air heat source for large buildings 40x80 in 10 to 65 degree
interior temp. The unit will use 2.75 gal. of waste oil per hour. The
annual maintenance is simple and requires cleaning of the fire box,
disposing properly of any solid waste accumulations. Usually a light ash is
all that remains.
See product specifications in
the table at the bottom of this page.
|
Product Number |
Price |
|
825-0835 |
$8,225.00 |
|
TRUCK - FOB
Iowa |
|
 |
Additional Greenhouse Heating Products
|
Product Description |
Product Number |
Wt. |
Price |
|
270 Gallon Fuel Tank
and Heater Support (Includes Oil Pump) |
825-0850 |
700 |
$1,485.00 |
|
J Model Oil Pump (For distances
over 25 ft. horizontal and 10 ft. lift) add to above price |
825-0875 |
N/A |
$140.00 |
|
|
Heatwave
Specifications
|
MODEL: |
HW150 |
HW250 |
HW350 |
|
Heat Range -
BTU's |
180,000 |
280,000 |
380,000 |
|
Fuel Use - USGPH |
0.6-1.33 |
1.33-2.0 |
2.6-3.2 |
|
Electrical
Voltage |
115 volt |
115 volt |
115 volt |
|
Amp Draw |
14.9 |
15.2 |
18.2 |
|
Compressed Air |
2 CFM |
2.5 CFM |
3 CFM |
|
PSI |
15 |
20 |
30 |
|
Flue Size |
8" |
8" |
8" |
|
Cabinet Size
WxLxH |
32x40x26 |
36x52x34 |
36x54x48 |
|
Overall Width
W/Burner |
44 |
48 |
40 |
|
Overall Length
W/Burner |
60 |
74 |
66 |
|
Height |
30 |
38 |
85 |
|
Ductable |
Yes |
Yes |
Yes |
|
Air Movement |
Belt Driven Motor on all Models |
|
Blower CFM Free
Air |
2600 |
3450 |
3800 |
|
Blower Motor HP |
Ύ HP |
1 HP |
2 HP |
|
Plenum Dimensions |
Straight Through Cabinet Design
for Hanging |
|
Mounting |
Ceiling Hung |
|
Weight
W/Blower/Burner |
480 |
750 |
1125 |
|
Shipping Weight
(FOB - George, IA) |
550 |
835 |
1170 |
|
Warranty |
All Models - Parts 1 yr - Chamber
10yrs pro-rated |
|
|
Contact All-American Associates, Inc. at
(800) 482-3566 for a custom quotation including quantity discounts and
freight charges. |
